
Replacing the Power Supply
Power Supply (661-4018)
1.WARNING: HIGH VOLTAGE
Position the power supply loosely in its mounting location.
2.Connect the power
3.Connect the power
4.Install the four power supply screws, starting with the machine screw in the lower right corner of the power supply. Then install the other screws (see photo above for locations).
5.Replace the hard drive.
6.Replace the display panel.
7.Replace the lower EMI shield.
8.Replace the front bezel.
9.Replace the access door.
Power Supply
1.WARNING: HIGH VOLTAGE
Position the power supply loosely in its mounting location.
2.Connect the power