
Replace the Clutch
1.Make sure the stand is erect and the end of the stand is inserted through the mounting hole in the rear housing.
2.Position the clutch on the stand with the spring at bottom right. Install the four long, clutch-
3.Adjust the clutch so that its chassis mounting holes align, and install the four machine screws that secure the clutch to the chassis.
4.Replace the optical drive.
5.Replace the hard drive fan.
6.Replace the logic board.
7.Replace the speakers.
8.Replace the display panel.
9.Replace the lower EMI shield.
10.Replace the front bezel.
11.Replace the memory access door.