PowerBook G4 (1GHz/867MHz)
AirPort Card
Replacement Instructions
Follow the instructions in this sheet carefully. Failure to follow these instructions could damage your equipment and void its warranty.
Note: Written and video instructions covering
Warning: Sharp edges can exist inside your computer and on any parts being removed or installed. Use caution to avoid injury.
During this procedure, keep small parts away from children.
Tools Required
•Soft towel or cloth, larger than the PowerBook
•Torx T8 screwdriver
Opening the Computer
Warning: Always shut down your computer before opening it to avoid damaging its internal components or causing injury. After you shut down the computer, the internal components can be very hot. Let the computer cool down before continuing.
To access the AirPort Card, you must first remove the battery and bottom case.
1.Place your computer on a clean, flat surface.
2.Shut down your computer and wait thirty minutes before continuing.
3.Disconnect the power cord and any other cables connected to the computer.
