Procedure
1.With the rib frame and heat exchanger removed, make sure
•The display is supported on a soft cloth in front of the top case
•The display cables are not strained
Warning: Be especially careful when working near cables that attach to the display. If any of these cables are damaged, the entire display module must be replaced.
The LVDS cable and connector are extremely delicate. Do not pull or pinch the LVDS cable or connector. If necessary, use a black stick or other nonconductive tool to guide the cables out of the top case.
2.Raise the inner clutch mount so it is pivoted away from the LVDS cable and sleep LED cable.
