
RECORDING IMAGES
Recording Macro Images
You can select either normal or macro
The table below describes the two settings available with the selector.
To do this: |
| Select this setting: |
Shoot normal images, at a distance of |
| |
about 80cm to (31.5" to | ) (Normal) |
|
Shoot |
| |
20cm (7.9" ) (Macro) |
|
|
The distances indicated above represent the distance from the camera’s lens surface to the subject.
Normal/Macro selector
34
Selecting the macro mode causes the
indicator to ap- pear on the monitor screen.
F1
Normally, you should leave the Normal/Macro selector set-
ting at .
You can select either flash off
or flash on
only in the macro mode. The initial default setting is flash off
.
Page 34 | 2002/6/18, AM 11:11Adobe PageMaker 6.5C/Win |