AT&T 984 user manual 122, To your phone on, Intercom paging, Signal not received

984CIB_(Rev3)28.04.06 4/28/06 6:28 PM Page 122

Telephone operation

Problem

A repeating short ring (error ring) sounds at all extensions when you assign an extension number

to your phone.

Solution

The extension number you chose is already assigned. Begin again and choose a different extension number from 11 to 26 (see Assign an extension number

to your phone on page 26).

You MUST assign a different extension number to every phone in your system.

In case of difficulty

Problem	Solution
Intercom paging	Make sure you have programmed your
signal not received.	intercom extension number correctly.
	Line 1 must be connected at all extensions,
	and must be the same telephone number/line
	for paging and intercom to work properly.

Problem	Solution
Cannot join a	The call privacy feature prevents another
conversation in	set on the system from interrupting
progress.	a conversation. Make sure you press the
	LINE button to release privacy. (See Call
	privacy on page 60.)

Problem	Solution
Error tone (fast	The Do not disturb feature is activated at
busy signal) heard	the extension you are calling.
when making a
page call.
Problem	Solution
A double beep sounds	There is a call on hold at this extension.
every 30 seconds.	Press and release the LINE button of the
	call on hold to return to the call and turn off
	the reminder beep.

122