984CIB_(Rev3)28.04.06 4/28/06 6:28 PM Page 47

Set auto-attendant day and night times

The auto-attendant feature only works with a multi-phone system. If you have more than one phone in your system, you MUST program the hours for day and night time so the answering system plays the correct outgoing announcement. Please see Answer system Auto-attendant operation beginning on page 110 for a detailed description of this feature.

k n

1.

Press Eto begin feature setup.

2.

Press -until the screen display includes

o

 

DTAD/AA.

i

3.

Press E. The screen display includes

 

 

ANSWERXSTATUS.

4.Press -until the screen display includes

DAY/NIGHT TIMES.

5.Press E. The screen display includes DAYxTIME and the current setting.

6.Press Eto start to change the day time setting. The screen display includes HOUR and the current setting.

—OR—

Press -and skip to step 11 on page 48 to leave the day time setting as it is and begin to change the night time setting.

7.Press <or >until the correct day time hour is shown. Then, press -to save the day time hour setting. The screen display includes MINUTE and the current setting.

8.Press <or >until the correct day time minute is shown. Then, press -to save the day time minute setting. The screen display includes AM/PM and the current setting.

continued on page 48

Feature setup

47

Page 53
Image 53
AT&T 984 user manual Set auto-attendant day and night times