984CIB_(Rev3)28.04.06 4/28/06 6:28 PM Page 20

Installation

Wall installation

continued from page 19

Two two-line jacks (To use this illustration option, you may want to use the short line cord for lines 1 and 2.)

Modular telephone jack lines 3 and 4

Modular telephone jack lines 1 and 2

Power

Standard

adapter

electrical

 

 

outlet

7.Initialization.

If no battery is installed when you connect the power cord, the phone runs a quick self-test and the screen displays Initializing for about three seconds.

￿NOTE: The phone will run through this same initialization any time it is reconnected to AC power if a working battery is not installed (for example, after a power failure or when the unit has been unplugged).

8.Check for dial tone.

Lift the handset and listen for a dial tone. If you cannot hear a dial tone, turn to In case of difficulty beginning on page 121.

20

Page 26
Image 26
AT&T 984 user manual Power