Getting started
Deregister a deskset
You may need to deregister the deskset from the main telephone base if you already have ten registered devices and need to replace a deskset, or if you wish to change the assigned number of your registered devices.
You must first deregister ALL the registered devices, and then register each device that you wish to use again individually.
Please read carefully through all the instructions in this section before beginning the deregistration process.
Please make sure the telephone system is not in use before deregistration. Deregistering a deskset does not remove the data saved on it. For details, see Deregister handsets and headset in the SynJ SB67118/SB67138 user’s manual.
Deregister the deskset from your SynJ SB67118 telephone base
1.On the SynJ SB67118 telephone base, press MENU/ENTER.
2. | Scroll down to Registration and press MENU/ENTER. | Deregister all | |
devices? |
| ||
3. | Scroll down to Deregistration and press MENU/ENTER. |
| |
<=No | >=Yes |
4.The main telephone base shows
Deregister all devices? <=No >=Yes. Press REP to exit or press SKIP to continue the deregistration process.
5.The main telephone base shows Deregistering. The main telephone base shows All handsets deregistered and beeps when the deregistration process is successful. It takes up to 10 seconds to complete.
Deregistering
All handsets
deregistered
10