Getting started

Deskset installation

Install the deskset as shown below.

Plug the large end of

the power adapter into a power outlet not

controlled by a wall switch.

Raise the antenna for optimum wireless range and performance.

Route the power adapter cord through the slot at the bottom of the deskset.

Plug the small end of the power adapter into the

power jack at the bottom of the deskset.

Plug the end of the coiled handset cord into the jack at the bottom of the deskset.

IMPORTANT INFORMATION:

Use only the power adapter supplied with this product. To order a replacement power adapter, visit our website at www.telephones.att.com, or call

1 (888) 915-2007.In Canada, dial 1 (866) 288-4268.

The power adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.

Page 10
Image 10
AT&T SB67148 user manual Deskset installation, Install the deskset as shown below