ATEN Technology KL9108, KL9116 After you successfully log in, the Local Console OSD appears

KL9108 / KL9116 User Manual

After you successfully log in, the Local Console OSD appears:

There are four buttons on the title bar at the top right. They are described below starting from the left and moving to the right:

ŠSwitch OSD mode (F6): If you invoke the OSD while accessing a KVM port, depending on the display resolution setting of the attached computer, the OSD may appear smaller than normal. Click this button (or press [F6]) to return the OSD to its original size and blank the background. Click again to recover the background.

ŠTransparent (F7): Clicking this button causes the OSD display to become semi-transparent, allowing whatever the OSD screen is covering to show through. Clicking the button again causes the OSD display to revert back to normal opacity.

Note: 1. We recommend that you set the refresh rate of the monitor higher than 75Hz before using this feature.

2.When the transparent feature is enabled, if you switch to a null port the feature will be disabled.

ŠLog out (F8): Clicking this button (or pressing F8) closes the OSD display and logs you out of the session.

ŠClose (Esc): Clicking this button closes the OSD display but does not log you out of the session. You can bring the display back with the OSD hotkeys (see OSD Hotkey, page 85).

30