
KL9108 / KL9116 User Manual
Timeout
The Timeout setting applies to ports with the Occupy I/O attribute. It controls the amount of time
To apply Timeout settings:
1.Click Attributes... on the Customization dialog box. The Setting I/O Attributes dialog box appears (see Attributes, page 52).
2.In the Timeout field, enter the Timeout time in seconds.
3.Click Apply. (To exit without saving your changes, click Cancel.) Note: The Timeout setting applies to all ports on the KL9108 / KL9116.
Miscellaneous
The functions performed by the remaining elements at the bottom of the screen are described in the table below:
Parameter | Explanation |
|
|
Reset on exit | Select this check box to reset the KL9108 / KL9116 and |
| implement new settings when you log out. Following a reset, |
| wait one to two minutes before logging back in. |
| Note: For some changes the Reset on exit check box is |
| automatically selected and the KVM switch will reset when |
| you log out. Clearing the check mark before logging out will |
| cause the new settings to be discarded. |
|
|
Reset Values | Clicking this button undoes all changes that have been made |
| to the Configuration and Administration pages (except for port |
| names, usernames, and passwords) and returns the |
| parameters to the original factory default settings (see OSD |
| Factory Default Settings, page 123). |
|
|
Clear Name List | This function clears the Port Names on the Main page. |
|
|
54