ATEN Technology KL9116, KL9108 Highlight the Action, and then Click Start, continues on next page

Chapter 6. The Windows Client

An explanation of the Hotkey Setup Actions is given in the table below:

Action	Explanation
Exit remote location	Breaks the connection to the KL9108 / KL9116 and returns
	you to local operation.
Adjust Video	Brings up the video adjustment utility.
Toggle OSD	Toggles the OSD display Off and On.
Toggle mouse display	If you find the display of the two mouse pointers (local and
	remote) to be confusing or annoying, you can use this
	function to shrink the non-functioning pointer down to a
	barely-noticeable tiny circle - which can be ignored. Since this
	function is a toggle - use the hotkeys again to bring the
	mouse display back to its original configuration.
Adjust mouse	This utility synchronizes the local and remote mouse
	movements following a video resolution change. After
	invoking this utility, simply click the local mouse pointer on top
	of the remote mouse pointer.
Substitute Alt key	Although all other keyboard input is captured and sent to the
	KL9108 / KL9116, [Alt + Tab] and [Ctrl + Alt + Del] work on
	your local computer. In order to implement their effects on the
	remote system, another key may be substituted for the Alt
	key. If you substitute the F12 key, for example, you would use
	[F12 + Tab] and [Ctrl + F12 + Del].
Substitute Ctrl key	If your local computer captures Ctrl key combinations,
	preventing them from being sent to the remote system, you
	can implement their effects on the remote system by
	specifying a function key to substitute for the Ctrl key. If you
	substitute the F11 key, for example, pressing [F11 + 5] would
	appear to the remote system as [Ctrl + 5].

Note: To invoke an action, you must press and release the keys one key at a time.

If you find the default Hotkey combinations inconvenient, you can re- configure them by following these five steps:

1.Highlight the Action, and then Click Start.

2.Key in the Function keys (one at a time). The key names appear in the Key field as you press them.

3.When you have finished keying in your sequence, Click Stop.

(continues on next page)

75