Chapter 6. The Windows Client
OSD Hotkey Summary Table
The following table presents a summary of the OSD Hotkey actions. See page 85 to set the OSD Hotkey.
To... | When... | Do This... |
|
|
|
Open the OSD | The OSD Toolbar is not open. | Click the OSD Hotkey twice. |
Toolbar. |
|
|
|
|
|
Open the OSD. | The OSD Toolbar is open. | Click the OSD Hotkey once. |
|
|
|
Open the OSD. | The OSD Toolbar is not open. | Click the OSD Hotkey three times. |
|
|
|
The Toolbar Icons
The meanings of the toolbar icons are explained in the table below.
Click to skip to the first accessible port on the entire installation without having to invoke the OSD.
Click to skip to the first accessible port previous to the current one without having to invoke the OSD.
Click to begin Auto Scan Mode. The KL9108 / KL9116 automatically switches among the ports that were selected for Auto Scanning under the Configuration Scan Select function (see page 85). This allows you to monitor their activity without having to switch among them manually.
Click to skip from the current port to the next accessible one without having to invoke the OSD.
Click to skip from the current port to the last accessible port on the entire installation without having to invoke the OSD.
Click to bring up the OSD.
Click to close the toolbar.
Click to logout and exit the Windows Client application.
Click to invoke Panel Array Mode (see page 70).
Note: The administrator selects which ports are accessible to each user with the User Management function (see page 40 for details).
67
