Instruction book
8.1.1 Function of control programs
Program/Function | Description | |
|
| |
Main screen | Shows in short the operation status of the compressor. It is the gateway | |
| to all functions. See Fig. 8.2. | |
Status data | Calling up the status of the compressor protection functions: | |
| - | |
| - | service warning |
| - | warning |
| Resetting of a | |
Measured data | Calling up: | |
| - | actually measured data |
| - | status of some inputs such as the motor overload protection per |
|
| compressor module |
Counters | Calling up the: | |
| - | running hours |
| - | regulator (module) hours |
| - | running hours per compressor module |
| - | number of starts per compressor module |
| - | number of |
Test | Allows a display test. | |
Modify parameters | Modifying the settings for: | |
| - | parameters (e.g. number of starts per day) |
| - | protections (e.g. dewpoint temperature of dryer for |
|
| machines) |
| - | service plans (see section 8.10) |
| - | clock functions (automatic compressor start/stop/pressure band |
|
| commands) |
| - | configuration (time, date, display language, …) |
Service | Calling up service plans and resetting the timers after carrying out the | |
| service actions belonging to a plan. See section 8.13. | |
Saved data | Calling up the saved data: last | |
8.1.2 Main screen
When the voltage is switched on, the Main screen is shown automatically, showing in short the operation status of the compressor.
Compressor Outlet |
| 7.0 bar |
Compressor Running |
| ↓ |
Menu |
| - - - - |
F1 | F2 | F3 |
| Fig. 8.2 Main screen, typical example |
|
If the function keys or arrow keys are not used for some minutes, the display will automatically return to the Main screen.
Whenever displayed on a submenu screen, press the key "Mainscreen" to return to the Main screen.
2920 1521 00 | 42 |
