
Instruction book
Important
Always consult Atlas Copco in case any timer setting should be changed. The intervals must not exceed the periods below and must coincide logically.
Programmed service plan intervals
Service plans | Intervals |
Service plan I | Each 2500 running hours |
Service plan A | Each 5000 running hours |
Service plan B | Each 10000 running hours |
Service plan D | Each 20000 running hours |
Resulting service actions to be carried out | |
Service actions according to | At |
Service plan I | 2500 running hours |
Service plan I and A | 5000 running hours |
Service plan I, A and B | 10000 running hours |
Service plan I, A, B and D | 20000 running hours |
… | … |
Procedure
1.Starting from the Main screen (see section 8.1.2):
-press the key "Menu" (F1)
-press the ↓ key until the option "Modify parameters" is followed by a horizontal arrow
-press the tabulator key (5) to activate the menu
2.Use the ↓ key to scroll until the option "Service plan" is followed by a horizontal arrow.
3.Press the tabulator key (5): a screen similar to the one below will appear:
Service Timer |
|
|
|
Running Hours |
| 1075 hrs | → |
Menu |
| ↓ | |
|
|
| |
F1 | F2 | F3 |
|
Fig. 8.16 Service menu
The screen shows the actual running hours (1075).
2920 1521 00 | 53 |