Instruction book
8.11.2 To activate/deactivate the timer
1.Starting from the Main screen (see section 8.1.2):
-press the key "Menu" (F1)
-press the ↓ key until the option "Modify parameters" is followed by a horizontal arrow
-press the tabulator key (5) to activate the menu
2.Use the ↓ key to scroll until the option "Clock function" is followed by a horizontal arrow. Press the tabulator key (5), following screen appears:
Clock Function
|
| Not activated → |
Menu | Modify | Delete |
F1 | F2 | F3 |
3.Press the key "Modify", "Not activated" starts blinking.
4.Press the ↓ key, "Not activated" changes into "Activated".
5.Press the key "Program".
Important:
1. It is necessary to program the start/stop/pressure band commands in successive order timewise, e.g.:
07.30 start
07.30pressure band 1
08.30pressure band 2
17.00stop
etc.
2.Make sure that the clock function is activated (indicated as "Activated"). If not, the programmed start/stop commands will not be executed.
8.11.3 To modify a command
Suppose the command to stop the compressor on Saturday 18:00 is to be modified: stopping at 17 o'clock instead of 18 o'clock:
1.Starting from the Main screen (see section 8.1.2):
-press the key "Menu" (F1)
-press the ↓ key until the option "Modify parameters" is followed by a horizontal arrow
-press the tabulator key (5) to activate the menu
2920 1521 00 | 56 |
