Manuals
/
Brands
/
Computer Equipment
/
Network Card
/
ATTO Technology
/
Computer Equipment
/
Network Card
ATTO Technology
2500C
- page 59
1
59
77
77
Download
77 pages, 1.35 Mb
50
CLI
Contents
Main
Page
Page
Contents
2.5 Additional configurations ....................................................19
3 ATTO ExpressNAV interface .............................................................21
3.1 ExpressNAV pages ..............................................................23
5 Copying iPBridge configurations .....................................................26
7 Alternative interface options ............................................................33
7.1.3 Maintenance commands ........................................41
7.1.4 Diagnostic commands ...........................................43
7.1.5 SCSI configuration commands .............................47
7.1.6 Serial port configuration commands ....................49
7.1.7 Ethernet commands ...............................................51
Page
Page
1 iPBridge 2500 provide storage options
iPBridge2500 features
Possible storage configurations
1.1 ATTO iPBridge 2500R/D
Installation instructions
ATTO Technology Inc. iPBridge Installation and Operation Manual
Front side with LEDs
Back (connector) side
1.2 ATTO iPBridge 2500C
Installation instructions
Page
2 Configuring the iPBridge
10 Configuration: Ethernet
2.1 Getting an IP address
2.2 NDMP configuration provides backup
Setting up NDMP
2.3 Mapping devices: NDMP
Page
2.4 Mapping devices: iSCSI
Single Target mode
Multiple Target mode
ATTO Technology Inc. iPBridge Installation and Operation Manual
Exhibit 2.4-1 Examples of single and multiple target modes
Mapping: single vs. multi target mode
Page
2.5 Additional configurations
Page
3 ATTO ExpressNAV interface
22 ATTO ExpressNAV
Exhibit 3.0-1 An ExpressNAV page
23
3.1 ExpressNAV pages
Serial Port Configuration
Time & Date Configuration
Ethernet Port Configuration
SCSI Configuration
Firmware
Restart
Help
25
4 Updating firmware
PUT
command from an FTP connection. The ATTO ExpressNAV method is preferred. Preliminary steps
Using ATTO ExpressNAV
Using FTP over GbE
5 Copying iPBridge configurations
You can copy the configuration from one iPBridge to another in the field using the
SEND and RECEIVE
ZModem
6 Troubleshooting
Inside out method
Check the host event log
Check the iPBridge event and trace logs
Visually inspect LEDs
Check for problems on attached devices
Check the following in order to find problems on attached devices:
enabled
Check host versions
Check the following to find problems on attached hosts:
29
Checking the serial port
Checking the iPBridge internal configuration
Checking iPBridge Ethernet ports
Checking the iSCSI Host Adapter or NIC
For a NIC using an OS iSCSI driver, continue to the iSCSI OS driver section.
Checking the iSCSI OS driver
Checking the Operating System
Checking the applications
Performance issues
TraceLog
If the host is not getting the performance it should, check the following items.
Checking SCSI devices
Checking iPBridge SCSI ports
Checking the host system
Checking the Operating System
7 Alternative interface options
34 Alternative interfaces
Exhibit 7.0-1 Start up messages.
7.1 CLI provides ASCII-based interface
36 CLI
7.1.1 CLI commands summary
Page
38 CLI
Exhibit 7.1-2 The following error messages may be returned by the Command line Interface:
7.1.2 General use commands
Page
41
7.1.3 Maintenance commands
RestoreConfiguration default
sets the password to its default value.
Changes to the Admin Level user name require an Admin Level password.
43
7.1.4 Diagnostic commands
ATTO iPBridge
Page
Page
Page
47
7.1.5 SCSI configuration commands
Page
49
7.1.6 Serial port configuration commands
The ATTO iPBridge
Page
51
7.1.7 Ethernet commands
These commands configure the management and data Ethernet ports including telnet parameters.
Changes to the Admin Level user name requires an Admin Level password.
53
7.1.8 NDMP commands
Page
55
7.1.9 iSCSI commands
Page
57
7.1.10 Mapping commands
on page 13 and
Mapping devices: iSCSI
on page 15 for details.
Page
Appendix A ATTO iPBridge, FibreBridge family
Page
Appendix B Cabling
SCSI cabling
Ethernet connections
v
Appendix C Glossary
)
, the Network Data Management Task Force
More information is available through the Storage Networking Industry Association
, and the IETF
Page
Appendix D Safety standards and compliances
FCC Standards: Radio and Television Interference
Canadian Standards
European Standards
Appendix E ATTO accessories
iSCSI Bridge board-level models
iSCSI Bridge desktop models & desktop models with rackmount kits
NDMP Bridge models
Cables
Appendix F Warranty, contact information