SNMPTrapAddress
Sets/displays the IP trap addresses and levels.Consult your network administrator for further assistance with SNMP.
Index: value between 1 and 6
IP Address: standard IP address
Trap Level: severity required for an event to trigger a trap: None: no traps will be sent to the address
ALL: all triggering events will be sent
Informational: a trap will be issued to the given address
Warning: warning and critical events will be sent
Critical: only critical events will trigger a trap
Set syntax: set SNMPTrapAddress [Index] [IPAddress] [none all warning critical ]
Get syntax: get SNMPTrapAddress
SNMPTraps
Enables/disables SNMP trap functions.Consult your network administrator for further assistance with SNMP.
Default: disabled
Set syntax: set SNMPTraps [enabled disabled]
Get syntax: get SNMPTraps
TailEventLog
Displays new events to the terminal. Press <ESC> to exit tail mode.
Immediate: TailEventLog
Temperature
Returns the current internal temperature in degrees Celsius.
Immediate command: get Temperature
TraceLog
When enabled, records various aspects of traffic the iPBridge receives to the trace log.
Default: disabled
Set syntax: set TraceLog [enableddisabled]
Get syntax: get TraceLog
TraceLogFilter
Filters the display of data for specific iPBridge subsystems when in TraceLog mode. If enabled for a particular port, that port is masked when the command TraceLogFilter is issued.
Default: disabled
Set syntax: set TraceLogFilter [ndmp scsi all ] [dp sb all ] [enabled disabled]
Get syntax: get TraceLogFilter [ndmp scsi all ] [dp sb all ]
Voltage
Displays the current level of voltages monitored by the iPBridge 2500.
VCC: +5.0V
VDDA: +3.3V
VDDB: +2.5V
ALL: all monitored voltages
Get syntax: get Voltage [VCCVDDAVDDBALL]
WrapEventLog
When enabled, the iPBridge logs up to 2,048 event entries before wrapping (overwriting the first entries). If disabled, the iPBridge stops logging event entries when the buffer is full.
Default: enabled
Set syntax: set WrapEventLog [enabled disabled] Requires a SaveConfiguration command
Get syntax: get WrapEventLog
WrapTraceLog
When enabled, the iPBridge logs up to 2,048 trace entries before wrapping (overwriting the first entries). If disabled, the iPBridge stops logging trace entries when the buffer is full.
Default: enabled
Set syntax: set WrapTraceLog [enabled disabled] Requires a SaveConfiguration command
Get syntax: get WrapTraceLog
46 CLI
