Chapter 3: Phone Functions
Options (Preferences)
Tap Options on the Tools menu to display the Options setting screen. A number of settings (Security, Sounds, etc.) can be made at this screen.
General
Sets number of minutes a line is disconnected after data communication ends.
(Display tab of Options can be set to display warning before line is disconnected.)
Select the mode for answering incoming calls.
Select the number of calls to be retained
in the Call Log. Calls exceeding this number are automatically deleted.
When contracting with two NAMs (Number Assignment Modules), you can select to use either of the NAMs.
System selection is possible in an area that permits roaming.
Automatic A: Scans the Priority system, if not found, scans the
Automatic B: Scans the Priority system, if not found, scans the
Home Only: Permits only home service.
Automatic: Permits roaming if the home service is not found.
When checked, CDMA network updates the time when Watcher is launched.
Check when connecting teletypewriter, etc. to the headphone jack.
Tap to save the new settings.
Tap to restore all the settings to the defaults.
Tap to return to the previous screen without storing the settings.
The operations for Cancel, Restore and Save are common for each tab screen.
72
