Avaya 15-601082 manual Introducing the Avpp, Overview, Required Materials, Locating the Avpp

Introducing the AVPP

Overview

As shown in the system diagram, the AVPP is connected to the Ethernet switch. The specifications covered here, allow for flexibility in physical placement of the components within the stated guidelines.

See the Setup and Administration Guide for your vendor's IP system, for information on LAN requirements, network infrastructure and IP addressing.

Required Materials

The following equipment must be provided by the customer:

Power Outlet – must accept Avaya provided AC adapter.

Backboard space – the AVPP is designed to be wall mounted to ¾” plywood securely screwed to the wall.

Screws – required to mount the AVPP to the wall. Four #8 - ¾” panhead wood screws (or similar device) are required.

Cat. 5 Cable – RJ-45 connector at the AVPP. Connection to the Ethernet switch.

Locating the AVPP

The AVPP measures approximately 4 x 12.5¾”x 7 inches, and weighs about five pounds. The unit can be wall mounted, vertically or horizontally, over plywood. The AVPP can also be rack mounted using a rack mount kit (sold separately).

Locate the AVPP in a space with:

Sufficient backboard mounting space (for wall mount) and proximity to the LAN access device (switched Ethernet hub) and power source.

Easy access to the front panel, which is used for cabling.

A maximum distance of 325 feet (100 meters) from the Ethernet switch.

Wireless Installation and Configuration Guide	Page 13
IP Office	[15-601082] Issue [1] (1 June 2006)