Overview, About this Guide | Avaya 15-601082 specs

Overview

About this Guide

Before you can begin using the 3600 series wireless phones, you will need to:

1.Install, configure and maintain the Avaya Voice Priority Processor (AVPP) within an IP telephony system.

2.Configure Avaya IP Office.

3.Configure the Access Points.

4.Install and configure the 3616/3620/3626 wireless phone.

To access software updates, go to www.spectralink.com/softwareupdates.

Further information about Wireless Telephony Best Practices is available from

www.spectralink.com/files/literature/NetLink_Best_Practices_122105_01.pdf.

Further information about IP Office is available from www.avaya.com/support and also from www.avaya.com/ipoffice/knowledgebase.

If you have questions about or problems with your phone that you cannot resolve after reading this document, contact Avaya Technical Support at 1 800 242-2121 (USA only) or your local authorized Avaya dealer.

Note

Where SVP is documented in this guide, AVPP applies.

Wireless Installation and Configuration Guide	Page 2
IP Office	[15-601082] Issue [1] (1 June 2006)

Image 8

Avaya 15-601082 manual Overview, About this Guide

Contents

IP Office Documentation information Avaya Support Table Of Contents Wireless Phone Installation Table Of Contents Page Declaration of Conformity Overview About this Guide Shielded Cables Safety InformationImportant Information  Link LEDs Overview of the AvppFront Panel of the Avpp Internal Gatekeeper Multiple AvppTiming Function Avpp Capacity Servers Number of Handsets Overview of Wireless Phone Requirements Phone Specifications Ccms Avaya Voice Priority Processor Series Wireless PhonesSystem Components IP Office Access PointsEthernet Switch Administrative Computer RouterTftp Server IP Multicast Addresses Phone Display Introducing the Avpp OverviewRequired Materials Locating the Avpp Avpp Configuration Connecting to the AvppConnecting via the Serial Port Introduction Connecting via Telnet Avpp System Menu Network Configuration Send All Avpp Configuration Wireless Installation and Configuration Guide IP Office QoS Configuration  Traffic Class Change Password Avpp Administration Adding an AvppRemoving an Avpp Changing the Master Avpp Enter the FTP Server IP Address IP Office ConfigurationConfiguring the Wireless Phone with IP Office Manager Adding a New User Updating the Configuration Voice Messaging Access IP Office Integration FactorsOption Meaning Entering an Extension and Password Extension ErrorPassword = # = OK Extension Error Retry/Restart Password ErrorExtension Override Wireless Phone Installation System Configuration Sample Installation and Configuration Sample Setup Avpp Network Configuration Title Phone Setup Wireless Phone Configuration Opening and Using the Admin Menu Avpp IP WEP IP Address Default Gateway and Subnet Mask Tftp Server IPOAI Server IP Call Server IP Learn Once Learn AlwaysStatic Entry To Enter License Management Restore DefaultsSite Survey Mode Security Password OAI On/OffCisco FSR Fast Secure Roaming Username Admin PW User-defined Preferences PasswordExtension Standby Menu Item Long Pulse Page Configuration Process License ManagementPage Testing a Wireless Phone Press Power On/Start Call Certifying the Installation Solving Coverage IssuesSite Certification Important Note Detect dBm Coverage Detect Overlap or Conflicts Confirm Supported Data Rates MAC Series Wireless Phones Software MaintenanceUpgrading Wireless Phones Download Failure or Recovery Messages Normal Download MessagesMessage Download Upgrading the Avpp Overview TroubleshootingAvpp Troubleshooting Error Status Alarm TextNetwork Status ActionPage Name Major Version Number Filename Software VersionGatekeeper Database Wireless Phone Troubleshooting Access Point ProblemsConfiguration Problems Introduction Wireless Phone Status Messages Message Description Do not Power Page Essid Power Off/End Call Avpp Failure has occurred during Page Index Avpp AL7 1LZ