4. Product and c omponents
2 1 3 2
Image4-3
BaseUnit
1 USB port
2 Status LED strip
3 Standby button
Table 4 -3

USB port

TheUSB portis used to update the software of both the Base Unit and the Buttons.
When plugging in theButton into the Base Unit, the Button is paired to the Base Unit. The Base Unit checks whether the Button’s
softwareand firmware are up to date. If not, the Base Unit updates the software and/or firmware.
Toupdate the Base Unit software, download the latest version of the software from the Barco website. Copy the file on a USB stick
andplug it into the USB port of the Base Unit. Follow the progressand instructions on the display.

Status LED strips

Thecolor of the LEDs at the front of the Base Unit give information on the status of the system.
LEDsbehavior Explanation
static red
• receivingcontent from the Buttons and streaming towards the display.
• pairingand software update of the Button is done. Youcan now unplug the
Button fromthe B ase Unit.
• duringthe first phase of the Base Unit boot process.
blinking white
• systemis starting up (during the second phase)
• Button pairingis in prog ress
• softwareupdate of the Base Unit
slowblinking white
• standbymode (i.e. muting the display output)
static white
• awakeand ready (i.e. showing the welcome message on the display)
• pairing isdone
red blinking
• an error occurred

Standby button

Thebutton at the front of the Base Unit has a power on/off function and a standby function.
• Whenthe system is awake, a short push triggers the system to go into standby mode.
• Whenthe system is in standby mode, a short push triggers the system to wake up.
• Whenthe system is powered on, a long push makes the system to shut down and power off.
• Whenthe system is shut down, a long push or short push triggers the system to start up.
R5900006 CLICKSHARE 04/12/2013 17