8. Web Interface
4. Select the current name and enter a new nam e.
Note: Thedefault hostnameis “ClickShare-<serialn umber>”.
8.12 Advanced settings: LAN network settings

About LAN network settings

Anetwork connection can be configured through DHC P or by manually entering a fixed IP address.
DHCP
Dynamic host configuration protocol. DHCP is a communications protocol that lets network administrators manage
centrallyand automate the assignment of IP addresses in an organization’s network. Usingthe Internet Protocol, each
machinethat can connect to the Internet needs a unique IP address. When an organization sets up its computer users
witha connection to the Internet, an IP address must be assigned to each machine. Without DHCP,the IP address
mustbe entered manually at each computer and, if computers move to another location in another part of the network,
a new IP addressm ustbe entered. DHCP lets a network administrator supervise and distribute IP addresses from
a central point and automaticallysends a new IP address when a computer is plugged into a different place in the
network.

DHCP setup of the LAN network

1. Log in to the ClickShare web interface.
2. Click the Setup tab (1) and click Advanced (2).
Image8-20
DHCPsetup
The Advanced tab is displayed.
3. Check the radio button next to DHCP Assigned (3).
4. Click Apply to confirm the changes.

Fixed IP address setup

1. Log in to the ClickShare web interface.
2. Click the Setup tab (1) and click Advanced (2).
66 R5900006 CLICKSHARE 04/12/2013