8. Web Interface
The following settings are the defaults:
• Meeting room identificationinfo is cleared.
• Language is setto English.
• Custom wallpapersar eremoved and the default wallpaper is restored.
• Displayres olutionis set to auto and standby timer is reset to infinity
• Display Identifiersare turned off.
• Hostname and SSID is set to clickshare-serialnumber.
• The SSID is broadcasted
• WiFi password is reset to clickshare.
• Thedefault WiFi channel is set back to frequency 2.4 GHz, channel 6.
• The update history is cleared.
• The table with the associated Buttons is cleared.
• The admin password is resetto admin.
• Debug logging and remote logging are disabled.
How to restore factorydefaults
1. Log in to the ClickShare web interface.
2. Click the Maintenance tab (1) and then click Configuration (2)..
Image8-36
Factorydefaults
3. Click on Load Default Settings to return to the factory defaults (3).
Alternative way to load default settings
1. With the Base unitswitched off, connect a USB keyboard to a U SB port at the back side the Base unit.
2. Power up the Base Unit.
Image8-37
Alternativeway
R5900006 CLICKSHARE 04/12/2013 79