6. Connecting
6. CONNECTING
Overview
• Videosignal connections to the Base Unit
• Audio connection
• LAN connection
• Power connection and switching on
• Connecting an iOS device
•BasicUse
• Advanced Use
• User Interface
• Capture mode: detailed - fast
• Shared desktop: primary - extended
•Audioconfiguration
TheClickShare Base Un it iscomp letelyassem bled atthe fac tory. Only the installation, connection and con-
figurationshould be done at site. The actual installation (on table,wall mounted or in a ceiling) is covered in
the InstallationGu ide (R5900004).

6.1 Video signal connections to the Base Unit

CAUTION:Makesure the Base Unit is installed properly before connecting.

About Video signal connection

Dependingon thelocal setup, a single screenor dual screen setup is possible.
Fora single screen setup, a DVI or DisplayPort connection should be made between the Base Unit and the display.
Fora dual screen setup, a DVI and a DisplayPort connection should be made between the Base Unit and the displays.

To connect

1. Connect the Base Unit to the display(s) using display cables.
Refer to “1” on image 6-1.
R5900006 CLICKSHARE 04/12/2013 29