6. Connecting
The LEDs of the Button startflashing white.
On your laptop a new drive appears.
Twosituation are possible now:
- A launcher is preinstalledon your laptop (downloaded from the Base Unit or Barco website, or deployed company-wide by
yourIT departm ent). ClickShare is immediately available. You can continue with step 5.
- nothing is pre-installed. Continue with step 3.
3. Browse to and double-click the ClickShare drive on your laptop.
Image6-26
Windowsenvironment
Image6-27
MACenvironment
4. Double-click the ClickShare application.
The ClickSharec lientsoftware starts and its icon appears in the system tray.
On a Windows computer:
On a Macintosh:
When the system is ready for use, a message appears close to the systray icon.
Image6-28
The LEDs of the Button are staticwhite.
5. To share your screen on the display, click the Button.
The LEDs of the Button become static red and your screen appears on the display. When audio is enabled on the ClickShare
Base Unit, the audio of your laptopis also available on the audio output of the Base Unit and it will be played via the meeting
room audio system. The icon return to the same state as in step 4.
Inthe system tray, the ClickShare icon starts rotating. On W indows computers the icon changes into .
Thename ofthe user logged on to the laptop which is sharing its content is briefly shown in the bottom left corner of the added
content.
ClickShareautomatically scales the content of your screen to the resolution of the meeting room display. The aspect ratio of your
screen ism aintainedto mak e surethe proportions are correct.
6. To remove your content from the display, click the Button again.
The LEDs of the Button become staticwhite.
7. When leaving the meeting room, unplug the Button from your laptop and put it back in the Tray.
No trace of the ClickShareapplication is left on your laptop.
R5900006 CLICKSHARE 04/12/2013 39