4. Product and c omponents
1USB connector
2Button
3LEDring
Table 4 -6

USB connector

Usingthe USB connector the Button can be plugged into a laptop (for sharing your screen) or the Base Unit (for pairing the Button
to the Base Unit or updating its software).

Button

Clickthe Button to display the content of the laptop’s screen on the meeting room display. Clicking the Button during the meeting
willtoggle the sharing of the screen.
Holding the button for2 s econdsbr ingsthe content of the laptop’s screen as full screen on the meeting screen, removing other
sources currently displayed.

LED ring

The LED ring indicates the current status of your ClickShare.
LEDs behavior Explanation
white blinking
• theButton is plugged in the laptop and initializing or waiting for the user
tos tartthe ClickShare application.
• pairing/softwareupdate of the Button in the Base Unit is in progress.
static white
• ClickShareis ready to startsharing your screen.
• pairingis done. Youcan now unplug the Button from the Base Unit.
static red
• sharingyou rscreen with the display.
• pairingand s oftwareupdate is done. You can now unplug the Button
from the Base Unit.
red blinking
• an error occurred.
off(no light)
• theButton is not or not properly inserted into the USB port.
• theButton m ightbe defective.
• theUSB portor computer m ightb e defective.

Button label

The label at the bottom of the Button contains:
• the Barco logo
• the Barco part number
• the serial number
• the revision number
• the production date (week/year)
• markings for applicable standards (CE, CCC, UL, ...)
• markings for waste regulation
• “Made in...”
Handlethe Button cable with care. Rough handling might cause defects.
4.6 About the Tray

Tray layout

Thefunction of the Tray is to hold the Buttons on the table after the meeting is finished. The Tray can hold up to 4 Buttons.
20 R5900006 CLICKSHARE 04/12/2013