9. Software updating
Image9-7
Presst heS tandby button atthe front if the unit does not start up automatically.
5. On the keyboard, press F12.
PressF12 imm ediately afterstarting up the Bas e Unit and keep it pressed until a message appears on screen asking to enter a
password.
Image9-8
6. Enter ’clickshare’ as password.
Bewarew hen enteringthe password as the Ba se Unitwill assume a QW ERTY keyboard.
The following screen appears.
Image9-9
Note: Thebrand of the software recovery stick may vary.
7. Select the software recovery stick and press Enter.
R5900006 CLICKSHARE 04/12/2013 89