8. Web Interface
Image8-21
FixedIP address
The Advanced tab is displayed.
3. Check the radio button next to Fixed address (3).
The IP address, subnet and gateway input opens.
4. Click in the input field ofthe IPaddress and fill out the 4 fields.
Note: Anaddress contains 4 octets with a maximum value of 255.
Thism ust NOT be 0.0.0.0 for staticIP-Address assignment
5. Click in the Subnet mask input fields and fill out the 4 fieldsas appropriate for the local subnet.
6. C lick in the Default Gateway input fields and fill out the 4 fields. Set the Default-Gateway to the IP-Address of the router (MUST
be on the local subnet!).
Note: Thism ust NOT be 0.0.0.0.
Ifthere is no router on the local subnet then just set this field to any IP-Address onthe subnet.
7. Click Apply to confirm the changes.
8.13 Advanced settings: WiFi settings

WARNING:Itis not allowed to operate the Base Unit outside its intendedgeographical region.

About WiFi

Aconnec tionwith the Base Unit can be made via a wireless connection. A fixed wireless IP address is used to establish the con-
nection.

How to set up

1. Log in to the ClickShare web interface.
2. Click the Setup tab (1) and click Advanced (2).
R5900006 CLICKSHARE 04/12/2013 67