Belkin PM01110 user manual Setting WPA/WPA2, Guest Access

Using the Web-Based Advanced User Interface

Table of Contents sections 1 2 3 4 5 6 7 8 9 10

Setting WPA/WPA2

1.Select “WPA/WPA2-Personal (PSK)” from the “Security Mode” drop-down box.

2.Select “WPA-PSK” for just WPA authentication, or “WPA2-PSK” for just WPA2 authentication, or you may select “WPA-PSK + WPA2- PSK” for WPA and WPA2 as the authentication type.

3.Enter your pre-shared key. This can be from eight to 63 characters and can be letters, numbers, or symbols. This same key must

be used on all of the clients that you set up. This pre-shared key will allow users full access to your network including shared files and printers.

4.Click “Apply Changes” to finish. You must now set all clients to match these settings depending on the type of access you want them to have.

Guest Access

The guest pre-shared key allows guest users an Internet-only access to restrict them from entering your network and having access to files on your PCs. Enter your pre-shared key for guest access. This can be from eight to 63 characters and can be letters, numbers, or symbols. Click “Apply Changes” to finish.

G Wireless Router 57