Chapter 6: Operation
Figure 6-40. A correct wire map for a straight through UTP cable.
UTP WIRE MAP: The wire map displays the pairing of the wires. The map above indicates that the first pair ("12>"), Pins 1 and 2, is 203 feet long and terminates in Pins 1 and 2 ("<12") on the far end of the cable. If there were any problems, they would be dis- played.
Press SAVE to either SAVE or NAME and SAVE the test. Press EXIT to discard the results.
6.3.6 Coax Testing
Figure 6-41. Test coax cable for opens, shorts,
length, and distance to fault.
Page 44
