Chapter 6: Operation
REVIEW: Use the UP and DOWN arrow to find the reading you wish to review in Printer Memory. Press SEL to review. “BLANK TEST NAME” indicates a name has not been created for the test.
Figure 6-55. Review screen.
ERASE: Selecting the erase function erases all of Printer Memory. There is no way to selectively erase readings. This screen verifies that you wish to erase all of Printer Memory.
Figure 6-56. Erase screen.
FLASH MEMORY: The test readings are stored in nonvolatile (flash) memory. The stored readings will remain until the “ERASE” function is performed. Powering off the tester or unplugging its battery will not affect the memory contents.
UNDERSTANDING THE READINGS: The display of the stored readings follows the same sequence as if you reviewed the test immediately after the test was conducted.
Page 53 |
