Bosch Appliances 500 user manual Values Available, Setting, Options

MIC Series 500 Camera Navigating the Menus en 37

preset number to be saved. This is similar for the alarms; however, the number is only visible if Multi Alarm is turned on, otherwise the Sony Set table is automatically mapped to the single alarm input (tamper switch).

Mapping to nothing saves the table information but it is not automatically called up at any time by the camera. For Nothing, and Normal mapping, the number option becomes unavailable. This submenu can only be exited through the Save and Exit or Exit Without Saving option.

The Setup Commands option loads in the table selected, showing 4 commands per page, each displaying the selected command type and its associated value. These are set as with any other options in the menu by selecting the appropriate line, Right, then using up and down to move through the list.

Changing the command type will change the setting for that type to the default value so the command type should be selected first and then the options second.

Setting	Options
Mapped To	Nothing / Normal / Preset with PTZ/ Preset without PTZ/ Alarm
Number	N/A / Preset 1-64 / Multi Alarm 1-12
No. of Commands	1-10

The list of available controls and values is below.

Setting	Values Available
Camera Zoom	0-28672
Digital Zoom	ON / OFF
Set Focus	4096-49152
Focus Mode	Auto/Manual
Focus Control	One Push Trigger / Force Infinity
AF Sensitivity	High / Low
Focus Near Limit	4096-49152
White Balance	Auto / Indoor / Outdoor / One Push / Auto Tracing /Manual / One
	Push Trigger
Red Gain	Reset / Plus 1 / Minus 1
Red Gain Set	0-255
Blue Gain	Reset / Plus 1 / Minus 1
Blue Gain Set	0-255
Exposure	Auto / Manual / Shutter Priority / Iris Priority / Gain Priority /
	Bright / Shutter / Auto / Iris Auto / Gain Auto
Slow Shutter	Auto / Manual
Shutter	Reset / Plus 1 / Minus 1
Shutter Set	0-19
Iris	Reset / Plus 1 / Minus 1
Iris Set	0-19
Gain	Reset/Plus 1/Minus 1
Gain Set	0-7
Brightness	Reset / Plus 1 / Minus 1
Brightness Set	0-19

Bosch Security Systems, Inc. User’s Manual F.01U.173.601 2.0 2010.11