14 en Mounting | MIC Series 500 Camera |
|
|
4Mounting
Installation should be made by qualified service personnel and conform to the National Electrical Code and applicable local codes.
The MIC 500 Series Camera range has been designed for easy installation on a variety of common fittings. The most common type of mount used is a dedicated CCTV camera pole where the camera is bolted directly to the top of the pole using industry standard 4 in. (101.6
mm)fittings. This type of camera pole provides a robust mounting platform that minimizes camera motion and typically has a large base cabinet for mounting ancillary equipment such as power supplies.
The camera can also be mounted on lamp post columns using the Pole Mount Bracket (MIC- PMB); however, users should be aware that lamp posts can often be subject to movement and are not suitable platforms in all conditions or for all applications.
The following mounting brackets are available:
Part | Description |
|
|
Wall Spreader Plate | |
|
|
Pole Mount Bracket | |
|
|
Corner Mount Bracket | |
|
|
Wall Mount Bracket | |
|
|
Shallow Conduit Adaptor | |
|
|
| Deep Conduit Adaptor |
|
|
For mounting directly to a building, brackets are available for all typical building installations such as upright (90°), canted (45°), or inverted.
Figure 4.1 Typical pole mount arrangement (MIC-PMB with MIC-SCA and MIC-WMB)
Figure 4.2 | Typical wall mounting arrangement | |
|
|
|
F.01U.173.601 2.0 2010.11 | User’s Manual | Bosch Security Systems, Inc. |
