Bosch Appliances DS7400XI, DS7445I Enter the Data Digit as a, Select Options, Enter DD as a

10.0Programming

10.1General Control Programing: Program Address (0000)

General Control programming defines the system-wide general operating parameters. See Glossary (section 6.1) for further details.

Normal Arming Custom Arming Perimeter Instant Arming Perimeter Arming Maximum Security Arming Closing Ring Back Siren on Communication Fail Restore Swinger Shunts

		Data Digit
	Enter the Data Digit as a:	1	2
Select Options	0 1 2 3 4 5 6 7 8 9 *0 *1 *2 *3 *4 *5
Allow Normal and Custom Arming**
Allow Perimeter Instant Arming**
Allow Perimeter Arming**

Allow Maximum Security Arming**

Closing Ring-Back

Siren on Comm. Fail for Silent Zone

50 Hz. operationΔ

60 Hz. operation

Δ= For installations in North America, select 60 Hz. operation.

*0 - *5 are Hex values. They will display as A - F at the keypads.

	Enter DD as a:
Select Options	0 1 2 3 4 5 6 7 8
Restore zone when Sounders Silence
Restore zone when Zone Restores
Restore zone when System is Disarmed
Allow Swinger Shunts. Send Bypass Reports
Allow Swinger Shunts. No Bypass Reports

**= • Normal Arming = [PIN] + [On]: If programmed, Normal Arming arms the entire system while allowing entry delays for entry/ exit zones.

•Perimeter Instant Arming = [PIN] + [No Entry] + [Perimeter Only]: If programmed, Perimeter Instant Arming arms only the perimeter of the system and does not allow entry delays for entry/exit zones.

•Perimeter Arming = [PIN] + [Perimeter Only]: If programmed, Perimeter Arming arms only the perimeter of the system while allowing entry delays for entry/exit zones.

•Custom Arming = [PIN] + [#] [4]: If programmed, Custom Arming allows custom arming of the system and bypasses the zone functions specified in data addresses 2725-2728.

•Maximum Security Arming = [PIN] + [No Entry] + [On]: If programmed, Maximum Security Arming arms the entire system and does not allow entry delays for entry/exit zones.

Page 34 P/N: F01U035325-01 Copyright © 2007 Bosch Security Systems, Inc. DS7400Xi (4+) Reference Guide