Bosch Appliances DS7447E Output Programming Program Addresses 2734, 2735, Programmable Output

10.7Output Programming: Program Addresses (2734, 2735, 2736)

Output programming defines the event, partition, and type of alarm (burglary or fire) that will trigger each of the three physical outputs on the control panel.

See section 3.0 for the location of the physical outputs on the control panel.

See Glossary (section 6.4) for further details.

Programmable Output 1 will be ON for 10 seconds after pressing [System Reset].

Programmable Output 2 will be OFF for 10 seconds after pressing [System Reset].

	3
Options		DD
Disabled		0
Armed Full		1
Armed Partial		2
Armed Any		3

Select Option	DD
Latch on ANY Zone Alarm**	0
ON during Entry Pre-Alert/Exit Warning	1
ON for 10 sec. after pressing [System Reset]	2
ON when system is Armed	3
Ground Start	4
System Status (ready to arm)	5
Zone Alarm	6
Zone Alarm delayed by 20 sec.	7
Keypad Sounder Output	8
Access Output (10 sec. pulse)	9
Keyfob	*0
Panic Duress Output***	*1
On during battery test	*3

Data Digit

1 2

Options		DD
Disabled		0
Burglar Alarm		1
Fire Alarm		2
Burg and Fire Alarm		3
		Data Digit
		1	2
		*0
Options	RF3334		DD

**= This includes invisible zones. See glossary for further details.

***= See section 6.4 for description of this option.

Output	Address	Default
Alarm	2734	6 3
Programmable Output 1	2735	3 3
Programmable Output 2	2736	2 3

Disabled			0
Momentary Option		Key	1
Toggle	Option	Key	2
Momentary	Auxillary	Key	3
Toggle	Auxillary	Key	4

DS7400Xi ( 4+) Reference Guide Copyright © 2007 Bosch Security Systems, Inc. P/N: F01U035325-01 Page 41