Bosch Appliances DS7447E, DS7445I, DS7400XI manual Enter the Data Digit as a, Select Options

10.30 Phone Number General Control Programming: Program Address (3155)

See Glossary (section 6.14) for further details.

						Data Digit
					1		2
		Enter the Data Digit as a:
Select Options	0 1	2	3 4 5 6 7 8 9	*0 *1

Enable remote programmer call-back

Dial pulse on all phone numbers

Dial tone on all phone numbers**

Dial tone, switch to pulse if required

ΔΔ Try DS7416i first

*0 - *1 are Hex values. They will display as A - B at the keypads.

ΔΔ= If this option is selected, see address 3153-3154.

**= Required on PBX systems

	Enter the Data Digit as a:
Select Options	0 1 2 3 4 5 6 7 8 9 *0 *1 *2 *3 *4 *5
Dialer delay of 15 sec. on non-24H burglar alarms only**
Dialer delay of 15 sec. on 24H burglar & fire alarms only**
Send alarms via either DS7416i or digital Δ
ΔΔ Send alarms via both DS7416i and digitalΔ ***
Use 110 Baud comm. for WDSRP
Use 300 Baud comm. for WDSRP

*0 - *5 are Hex values. They will display as A - F at the keypads.

Δ= Only applicable when using the DS7416i option.

ΔΔ= If this option is selected, see address 3153-3154.

**= These selections can only be used with systems that have only one partition.

***= This selection must be chosen for UL Listed Requirements when using the DS7416i module.

10.31Phone Number Format Programming: Program Addresses (3156-3157)

Select Option	DD
Phone Number Disabled	0
3/1 (no Extended Reporting)	1
3/1E (Extended Reporting)	2
3/1 with Parity	3
3/1E with Parity	4
4/1	5
4/2	6
BFSK	7
SIA 110 Baud	8
Contact ID	9
SIA 300 Baud	*0
Personal Dialing	*2
Pager	*5

NOTE:

Data Digit

1 2

Enter the DD as a:

Select Options 0 1 2 3 4 5

1900 Hz. Data/1400 Hz. Acknowledge

1800 Hz. Data/2300 Hz. Acknowledge

BFSK, SIA, Contact ID

10 Pulses per Second (PPS)

20 Pulses per Second (PPS)

40 Pulses per Second (PPS)

*0, *2, and *5 are Hex values. They will display as A, C, and F

at the keypads.

Phone Number 1 Format = Address 3156

Phone Number 2 Format = Address 3157

When using the DS7416i Advanced Radio Communications Module: Program address 3156 as:

data digit 1 = 9, data digit 2 = 1. Program address 3157 as: data digit 1 = 9, data digit 2 = 1.

DS7400Xi ( 4+) Reference Guide Copyright © 2007 Bosch Security Systems, Inc. P/N: F01U035325-01 Page 57