Bosch Appliances DS7447, DS7445I manual Pager Delay Time: Program Address, Master Code PIN Number

Program Address 7592

Data Digit

Data Digit

10.33 Pager Delay Time: Program Address (4038)

When using the Pager Dialing Format (selected in Addresses 3156 and 3157), you may insert a delay time after the phone number is dialed and before the reports are sent to the pager system. This delay can be used to allow for greeting and instruction messages in the pager system. This delay will not affect any other report formats.

1 2

Pager Delay Time

Address 4038

0 to 99 seconds

Default = 10 seconds

10.34 Programmer’s and Master Code Programming: Program Addresses (7589-7592)

Programmer’s Code programming defines what the Programmer’s Code will be. This code is used to enter the programming mode from the keypads.

Although the DS7400Xi (Ver. 4+) Control/Communicator is shipped with 6-digit codes preprogrammed, it is also shipped with a 4-digit PIN length default. The default codes for the Programmer’s Code and the Master Code will be 4-digits (9876 and 1234 respectively) unless you have reprogrammed for a 6-digit PIN length.

Program Address 7589

Data Digit

1

9

Programmer’s Code

Enter as 6 digits.

It can not be the same as any PIN number.

2

8

3

7

4

6

5

5

6

4

The Default for the Programmer’s Code = 987654

Master Code programming defines what the Master Code will be. This code is the highest authority level for a PIN. If the Master Code is lost, this address may be used to program a new one.

Otherwise, the Master Code Programming Mode should be used to create PINs that have a Master Code authority level.

Master Code for User Number 001 has its authority fixed at level 0. It will always have access to all partitions.

NOTE: User Numbers 002 through 200 must be programmed from the Master Code Programming Mode.

Master Code PIN Number

(Default for this User 001 is 123456)

1

1

2

2

3

3

4

4

5

5

6

6

10.35 PIN Length Programming: Program Address (3478)

PIN Length Programming defines the length of the PINs that are assigned to each user.	Data Digit
PINS can be programmed to be 4 or 6 digits in length.	1	2

		0
Select Option
	0
4-digit PINs
6-digit PINs	1

DS7400Xi ( 4+) Reference Guide Copyright © 2007 Bosch Security Systems, Inc. P/N: F01U035325-01 Page 59