•DS7460: Dual Zone Module (up to 60 per system. Requires a DS7430 Multiplex Expansion Module).

The DS7460 provides a means of monitoring conventional Normally Open or Normally Closed contacts. It reports their status to the control panel as multiplex addresses. It occupies two multiplex zones on the system and can monitor up to two separate loops.

•Current Draw = 1 mA, Standby; 1 mA, Alarm.

•DS7465: Input/Output Module (up to 60 per system. Requires a DS7430 Multiplex Expansion Module).

The DS7465 provides a Form “C” relay that may be programmed to activate on system events, and an input loop to monitor conventional Normally Open or Normally Closed contacts. It reports their status to the control panel as multiplex addresses.

•Current Draw = 1 mA Standby; 1 mA with relay energized.

•Occupies 2 zones.

•DS7480: Bell Supervision Module (1 per system).

The DS7480 provides a means of monitoring bells. It provides a supervised (polarity reversing) output relay to activate the bell. It also provides a Form “C” Bell Fault Output to be connected to the control panel.

•Current Draw = 7 mA @ 12 VDC, Standby; 50 mA @ 12 VDC, Alarm.

•DS7481: Single Phone Line Monitor (1 per system).

The DS7481 provides a means of monitoring a single phone line for fault conditions. When a fault is detected, the DS7481 automatically closes its Normally Open relay contacts to provide a means of signaling the fault.

•Current Draw = 20 mA, Standby; 20 mA, Alarm.

•DS7488: Octal Relay Module (2 per system).

The DS7488 provides 8 Form “C” relay outputs for addition to the system. The outputs are fully programmable and can be activated by system events. Each output operates individually of the other 7 outputs for complete flexibility.

•Current Draw = 10 mA + 40 mA for each relay when energized.

•DS7489: Solid State Output Module (2 per system).

The DS7489 is a Solid State Octal Driver Module that provides 8 open collector transistor outputs. The outputs are fully programmable and can be activated by system events. Each output operates individually of the other 7 outputs for complete flexibility. The DS7489 Module has not been investigated by Underwriters Laboratories, Inc.

•Current Draw = 10mA.

•Outputs: Provides a current sink (the output shorts to common (-) when activated). The maximum current draw for all 8 outputs combined cannot exceed 750 mA.

•DS9484: The DS9484 is a Remote Notification Appliance Circuit (NAC) Power Supply designed to add four additional NACs (NFPA 72 Class B, Style Y) to a Fire Alarm Control Panel (FACP). When connected to the Options Bus of the DS7400Xi, it can provide intelligent control of its individual outputs. It supplies 6 A of NAC power through four circuits to drive horn strobe loads. It is UL Listed as a fire accessory for use in Commercial fire applications and as a continuous-load power supply for auxiliary devices.

•Current Draw = 150 mA, Standby; 6 A maximum, Alarm

•MX280: Multiplexed Photoelectric Smoke Detector (up to 120 detectors may be used per system. Requires a DS7430 and occupies one multiplex zone). Detects smoke and automatically determines the detector’s sensitivity using the Detection Systems “Chamber Check” feature.

•Current Draw = 500 μA, Standby; 560 μA, Alarm.

•MX280TH: Multiplexed Photoelectric Smoke Detector with a 135°F heat sensor (up to 120 detectors may be used per system. Requires a DS7430 and occupies one multiplex zone). Detects smoke and is equiped with a 135°F heat sensor for high temperature alarms. The Detection Systems “Chamber Check” feature automatically determines the detector’s sensitivity.

•Current Draw = 500 μA, Standby; 560 μA, Alarm.

•MX280THL: Multiplexed Photoelectric Smoke Detector with a 135°F heat sensor and a 45°F freeze alarm (up to 60 detectors may be used per system. Requires a DS7430 and occupies two multiplex zones). Detects smoke and is equiped with a 135°F heat sensor for high temperature alarms and a 45°F sensor for freeze alarms. Freeze alarms are reported separately from smoke and high temperature alarms. The Detection Systems “Chamber Check” feature automatically determines the detector’s sensitivity.

•Current Draw = 500 μA, Standby; 560 μA, Alarm.

•MX540: Multiplexed Passive Infrared (PIR) Intrusion Detector (DS7473) with a standard range of 40 by 50 feet (12 by 15 meters). Requires a DS7430 and occupies one multiplex zone.

•Current Draw = 200 μA, Standby; 2 mA, Alarm.

•MX835 TriTech Microwave/PIR Intrusion Detector with “Pet Avoidance” technology and a standard range of 35 by 35 feet (10.7m by 10.7 m). Requires a DS7430 and occupies one multiplex zone.

•Current Draw = 6 mA, Standby; 35 mA in “Trouble” and Walk Test mode.

•MX775 Multiplex Passive Infrared (PIR) Intrusion Detector with

(DS7470) a standard range of 50 by 50 feet (15 m by 15 m). Requires a DS7430 and occupies one multiplex zone.

•Current Draw = 200 μA, Standby; 2 mA in Walk Test mode.

DS7400Xi ( 4+) Reference Guide

Copyright © 2007 Bosch Security Systems, Inc.

P/N: F01U035325-01 Page 7

Page 6 Page 8
Page 7
Image 7
Bosch Appliances DS7445I, DS7447E, DS7400XI manual Current Draw = 500 μA, Standby 560 μA, Alarm
Page 6 Page 8

DS7445I, DS7447, DS7400XI, DS7447E specifications

Bosch Appliances offers a range of state-of-the-art home solutions, with models like the DS7447, DS7400XI, DS7445I, and DS7447E showcasing advanced technology and innovative design. Each of these models reflects Bosch's commitment to quality, efficiency, and user convenience.

The Bosch DS7447 is designed for the modern kitchen. This model features a fully integrated design, allowing it to blend seamlessly into any cabinetry. With a spacious capacity, it accommodates various cooking needs, ensuring every home chef has ample room. Its intuitive control panel simplifies operation, allowing users to select temperature settings with ease. The energy-efficient technology contributes to lower utility bills while still delivering outstanding performance.

Moving on to the Bosch DS7400XI, this model stands out due to its sleek stainless steel finish, which not only enhances its aesthetic appeal but also offers durability. It is equipped with advanced cooling technology that ensures even temperature distribution, extending the lifespan of stored food. This model also incorporates a sophisticated air filtration system, eliminating unwanted odors and maintaining a fresh environment within the appliance. The adjustable shelving adds flexibility to storage options, accommodating items of varying sizes.

The Bosch DS7445I combines style and functionality. This particular model is highlighted by its quiet operation, making it a great choice for open-concept living spaces. With a focus on user-friendliness, it features a digital display and smart sensors that monitor performance and inform users when maintenance is required. Furthermore, this model is known for its eco-friendly operation, utilizing minimal energy without compromising on effectiveness, making it suitable for environmentally conscious households.

Finally, the Bosch DS7447E brings innovation to the forefront with its smart connectivity features. Users can control and monitor the appliance remotely via a smartphone app, allowing for a seamless cooking experience even when away from home. The model also boasts quick-cooling technology, ensuring that items are chilled faster without sacrificing quality. The design emphasis placed on user accessibility strengthens its appeal for diverse households.

In conclusion, Bosch Appliances' DS7447, DS7400XI, DS7445I, and DS7447E each offer unique benefits tailored to meet various needs. With exceptional quality, advanced technologies, and user-centered designs, Bosch continues to position itself as a leader in the home appliance market.
Top Page Image Contents