Bosch Appliances DS7447E, DS7445I, DS7400XI manual covering addresses 0545 through

10.41 Alpha Description Programming: Program Addresses (0545-2720, 5001-6920)

Alpha Description Programming allows up to 16 characters to be programmed for the description of each partition or zone (e.g. “J. Hill’s Office”). If a description is less than 16 characters, leave the remaining address(es) blank. Once programmed, the descriptions will be displayed on the alpha keypads.

The following chart lists the Program Addresses used to program Alpha-Numeric characters for each partition or zone:

See Section 10.41.1 for an Alpha Description Programming worksheet for Partitions 1 through 8 and Zones 1 through 8.

See the Programming Addresses Worksheet (P/N: 43850) for a complete Alpha Programming Worksheet

(covering addresses 0545 through 6920).

Words are created one character at a time. Each character uses two data digits.

The data digit values for these characters are shown below:

DS7400Xi ( 4+) Reference Guide Copyright © 2007 Bosch Security Systems, Inc. P/N: F01U035325-01 Page 69