Copy options (temporary settings)

When you want to quickly change the copy settings temporarily for the next copy, use the temporary Copy keys. You can use different combinations.

The machine returns to its default settings one minute after copying, unless you have set the Mode Timer to 30 seconds or less. (See Mode Timer on page 22.)

Enlarging or reducing the image copied

You can choose the following enlargement or reduction ratios:

Press100%*

97% LTRiA4

94% A4iLTR

91% Full Page

85% LTRiEXE

83% LGLiA4

78% LGLiLTR

70% A4iA5

50%

Custom(25-400%)

Auto

200%

141% A5iA4

104% EXEiLTR

*The factory setting is shown in Bold with an asterisk.

Auto sets the machine to calculate the reduction ratio that best fits the size of paper.

Auto is only available when using the ADF.

Making copies

Custom(25-400%)allows you to enter a ratio from 25% to 400%.

To enlarge or reduce the next copy follow the instructions below:

a Make sure you are in Copy mode . b Load your document.

c Use the dial pad to enter the number of copies (up to 99).

d Press Enlarge/Reduce.

Press c.

e Do one of the following:

„Press a or b to choose the enlargement or reduction ratio you want.

Press OK.

„Press a or b to choose

Custom(25-400%). Press OK.

Use the dial pad to enter an enlargement or reduction ratio from 25% to 400%. (For example, press 5 3 to enter 53%.)

Press OK.

f Press Start.

Note

12

Page Layout Options 2 in 1(P), 2 in 1(L), 4

in 1(P) or 4 in 1(L) are not available with Enlarge/Reduce.

85