Chapter 13
c Do one of the following:
Press a or b to choose a setting you need to change and press OK, and then press a or b to choose an option for the setting and press OK.
If you do not need to change the current default settings, go to step d.
Print File Set
aPaper Size
Media Type
bMultiple Page
Select ab
•You can choose the following settings:
Paper Size Media Type Multiple Page Orientation Duplex Collate Tray Use Print Quality PDF Option
•Depending on the file type, some of these settings may not appear.
f Press Start
IMPORTANT
•To prevent damage to your machine, DO NOT connect any device other than a digital camera or USB Flash memory drive to the USB direct interface.
•DO NOT remove the USB Flash memory drive or digital camera from the USB direct interface until the machine has finished printing.
Note
•If you want to change the default setting for the paper tray to feed paper from, press Menu, 1, 6, 3 to change the paper tray setting.
•You can change the default settings for Direct Print by using the control panel when the machine is not in the Direct Print mode. Press Menu, 5 to enter the
USB Direct I/F menu. (See Menu table on page 172.)
96