Close the front cover.

f Take out the drum unit and toner cartridge assembly. Leave the toner cartridge installed in the drum unit.

g Put the drum unit and toner cartridge assembly into a plastic bag and seal the bag.

h

i Put the styrofoam piece marked “FRONT” into the original carton (1). Pack the drum unit and toner cartridge assembly (2) and put it in as shown below (3). Wrap the machine in the plastic bag and put it in the original carton (4). Put the printed material behind the machine (5).

Troubleshooting and routine maintenance

j Put the two styrofoam pieces into the carton matching the front of the machine to the “FRONT” mark on one of the styrofoam pieces, and the back of the machine to the “REAR” mark on the other styrofoam pieces (6). Put the AC power cord and printed materials in the C original carton as shown below (7).

Note

If you are returning your machine to Brother as part of the Exchange Service, pack only the machine. Keep all separate parts, including the drum unit and toner cartridge assembly, and printed materials to use with your ‘Exchange’ machine.

k Close the carton and tape it shut.

169