Cleaning the corona wire

If you have print quality problems, clean the corona wire as follows:

a Turn off the machine’s power switch. Unplug the telephone line cord first, disconnect all cables, and then unplug the power cord from the AC power outlet.

b Open the front cover and slowly take out the drum unit and toner cartridge assembly.

Troubleshooting and routine maintenance

c Clean the corona wire inside the drum unit by gently sliding the blue tab from right to left and left to right several times.

C

1

Note

Be sure to return the blue tab to the home position (a) (1). If you do not, printed pages may have a vertical stripe.

d Put the drum unit and toner cartridge assembly back in the machine.

IMPORTANT

• We recommend that you place the drum unit and toner cartridge assembly on a clean, flat surface with a sheet of disposable paper or cloth underneath it in case you accidentally spill or scatter toner.

• Handle the toner cartridge carefully. If

e Close the front cover.

toner scatters on your hands or clothes,

wipe or wash it off with cold water at once.

 

• To prevent damage to the machine

 

caused by static electricity, DO NOT touch

 

the electrodes shown in the illustration.

 

 

 

 

 

 

 

 

 

157