Chapter 9

Paging

When Paging is chosen, the machine dials the cell phone or pager number you programmed. This activates your cell phone or pager so you will know that you have a fax message in the machine’s memory.

a Press Menu, 2, 5, 1.

25.Remote Fax Opt 1.Fwd/Page/Store

aOff

bFax Forward Select ab or OK

b Press a or b to choose Paging. Press OK.

c Enter your cell phone or pager number followed by # # (up to 20 digits). Press OK.

Do not include the area code if it is the same as that of your machine.

For example, press

1 8 0 0 5 5 5 1 2 3 4 # #

d Do one of the following:

„If your pager needs a PIN, enter the PIN, press #, press Redial/Pause, enter your fax number followed by #

#.

Press OK

(For example, press:1 2 3 4 5 #

Redial/Pause 1 8 0 0 5 5 5 6 7 8 9 #

#)

„If you do not need a PIN, press OK.

„If you are programming a cell phone number, press OK.

e Press Stop/Exit.

Note

•If you have set Paging, a backup copy will automatically be printed at the machine.

•You cannot change a Paging or PIN number remotely.

72

Fax Storage

The Fax Storage feature lets you store your received faxes in the machine’s memory. You can retrieve stored fax messages from a fax machine at another location using the remote retrieval commands. (See Retrieving fax messages on page 76.) Your machine will automatically print a copy of the stored fax.

a Press Menu, 2, 5, 1.

25.Remote Fax Opt 1.Fwd/Page/Store

aOff

bFax Forward Select ab or OK

b Press a or b to choose Fax Storage. Press OK.

c Press Stop/Exit.