Checking and canceling waiting jobs
Check which jobs are still waiting in the memory to be sent. If there are no jobs, the LCD will show No Jobs Waiting. You can cancel a fax job that is stored and waiting in the memory.
a Press Menu, 2, 7.
The number of jobs still to be sent will be displayed.
b Do one of the following:
Sending a fax
Sending a fax at the end of a conversation
At the end of a conversation you can send a fax to the other party before you both hang up.
a Ask the other party to wait for fax tones (beeps) and then to press the Start or Send key before hanging up.
b Make sure you are in Fax mode . c Load your document.
Press a or b to scroll though the |
waiting jobs, press OK to choose a |
d Press Start.
5
job, and then press 1 to cancel it. |
Press 2 to exit without canceling. |
c When you have finished, press Stop/Exit.
Sending a fax manually
Manual transmissionManual transmission lets you hear the dialing, ringing and
a Make sure you are in Fax mode . b Load your document.
c Press Hook and listen for a dial tone. Or pick up the handset of the external telephone and listen for a dial tone.
d
e When you hear the fax tone, press Start.
If you are using the scanner glass, press 1 to send a fax.
f If you picked up the handset of an external telephone, replace it.
If you are using the scanner glass, press 1 to send a fax.
e Replace the handset of an external telephone.
Out of memory message
If you get an Out of Memory message while scanning the first page of a fax, press Stop/Exit to cancel the fax.
If you get an Out of Memory message while scanning a subsequent page, you will have the option to press Start to send the pages scanned so far, or to press Stop/Exit to cancel the operation.
Note
If you get an Out of Memory message while faxing and you do not want to delete your stored faxes to clear the memory, you can send the fax in real time. (See Real Time Transmission on page 45.)
47