Chapter 12

Making N in 1 copies (page layout)

You can reduce the amount of paper used when copying by using the N in 1 copy feature. This allows you to copy two or four pages onto one page, which lets you save paper.

IMPORTANT

Please make sure the paper size is set to

Letter, A4, Legal or Folio.

(P) means Portrait and (L) means Landscape.

You cannot use the Enlarge/Reduce setting with the N in 1 feature.

a Make sure you are in Copy mode . b Load your document.

c Use the dial pad to enter the number of copies (up to 99).

d Press N in 1.

e Press a or b to choose 2 in 1 (P), 2 in 1 (L), 4 in 1 (P),

4in 1 (L) or Off(1 in 1). Press OK.

f Press Start to scan the page.

If you placed the document in the ADF, the machine scans the pages and starts printing.

If you are using the scanner glass, go to step g.

g After the machine scans the page, press 1 to scan the next page.

Flatbed Copy:

Next Page?

a1.Yes

b 2.No Select ab or OK

88

h Place the next page on the scanner glass.

Press OK.

Repeat steps gand h for each page of the layout.

i After all the pages have been scanned, press 2 in step g to finish.

If you are copying from the ADF:

Insert your document face up in the direction shown below:

„2 in 1 (P)

„2 in 1 (L)

„4 in 1 (P)

„4 in 1 (L)