Types of paper to avoid

IMPORTANT

Some types of paper may not perform well or may cause damage to your machine.

DO NOT use paper:

•that is highly textured

•that is extremely smooth or shiny

•that is curled or warped

1

1

10.08 in. (2mm) or greater curl may cause jams to occur.

•that is coated or has a chemical finish

•that is damaged, creased or folded

•that exceeds the recommended weight specification in this guide

•with tabs and staples

•with letterheads using low temperature dyes or thermography

•that is multipart or carbonless

•that is designed for inkjet printing

If you use any of the types of paper listed above, they may damage your machine. This damage is not covered under any Brother warranty or service agreement.

Loading paper and documents

Envelopes

Most envelopes will be suitable for your machine. However, some envelopes may have feed and print-quality problems because of the way they have been made. A suitable envelope should have edges with 2 straight, well-creased folds and the leading edge should not be thicker than two sheets of paper. The envelope should lie flat and not be

of baggy or flimsy construction. You should buy quality envelopes from a supplier who understands that you will be using the envelopes in a laser machine.

Envelopes can only be fed from the MP tray. Do not print envelopes using duplex printing. We recommend that you print a test envelope to make sure the print results are what you want before you print or purchase a large quantity of envelopes.

Check the following:

„Envelopes should have a lengthwise sealing flap.

„The sealing flaps should be folded crisply and correctly (irregularly cut or folded envelopes may cause paper jams).

„Envelopes should consist of two layers of paper in the area circled in figure below.

1

1

1Feeding direction

„Envelope joints that are sealed by the manufacturer should be secure.

„We recommend that you do not print within 0.6 in. (15 mm) of the edges of envelopes.

17