Changing a 2-sided fax layout

You need to choose the duplex scanning format before you send a fax. The format you choose will depend on the layout of your 2-sided document.

a Press Menu, 1, 9, 3.

19.Document Scan 3.Duplex Scan

aLong edge

b Short edge Select ab or OK

b Do one of the following:

„If your document is flipped on the Long edge, press a or b to choose

Long edge. Press OK.

Long edge

PortraitLandscape

„If your document is flipped on the Short edge, press a or b to choose

Short edge. Press OK.

Short edge

PortraitLandscape

c Press Stop/Exit.

Sending a fax

Sending a fax from the scanner glass

You can use the scanner glass to fax the pages of a book, or a single page at a time. The documents can be up to Letter, A4, Legal or Folio size. Press Stop/Exit to cancel a fax in progress.

a Make sure you are in Fax mode .

b Place your document face down on the scanner glass.

c Dial the fax number. (See How to dial

5

on page 63.)

d Press Start.

The machine starts scanning the first page.

e After the machine scans the page, the LCD will prompt you to choose one of the options below:

Flatbed Fax:

Next Page?

a1.Yes

b2.No (Send) Select ab or OK

„Press 1 to send another page. Go to step f.

„Press 2 or Start to send the document. Go to step g.

f Place the next page on the scanner glass, press OK. Repeat steps eand f for each additional page.

Flatbed Fax:

Set Next Page

Then Press OK

g Your machine will automatically send the fax.

39